Ultrasonic System - Electronic unit ( BLACKBOX)
and Transducer (dB Transducers) - for Level Monitoring and Control.
• There are 3 Models:
  • 2 Output Relays and Analog Output 4-20 mA ( BBx130 );
  • Digital Communications: Modbus or Profibus ( BBx134 );
  • CSO with integral Data Logger ( BBx136 ).
• Range: Dependent on Transducer. Nominally 3 m to 25 m .
• Echos are being analysed by Pulsar's amazing DATEM software.
• Series of dB Transducers are ATEX Zone 1 certified, with the option of Zone 0.

Ultrasonic Systems - Electronic unit ( ULTRA 3 / ULTRA 5)
and Transducer ( dB Transducers) - for level monitoring.
• Output: 3 Relays (ULTRA 3) / 5 Relays (ULTRA 5).
• Ranges: 3 - 40 m (depending upon transducer).
• Max separation between transducer and controller - 1000m.
• Display: 6 digits + 12 characters text + bargraph with direction indicators.

Dual-channel ultrasonic system: electronic unit ( ULTRA TWIN)
and transducer (dB Transducers).
Each channel can be configur to level-volume monitoring / pump control or as OCM.
• Output: 2 Analogue - isolated 4-20mA / 0-20mA;   6 Relays - 5A/240V;
  Digital - duplex RS232.
• Ranges: from 70mm to 40m (depending upon transducer).
• Two displays: each channel has its own display.
• Power: 115/230Vac, 10-36Vdc.

All-in-one self contained (electronic+transduser) Ultrasonic units ( IMP) for level monitoring and control.
• Ranges: 0.125-3m (IMP 3), 0.3-6m (IMP 6), 0.3-10m (IMP 10).
• 2 alarm relays.
• 2 or 3-wire configurable, 2-wire I.S.
• Program via the integral keypad or by using IMPview software.

Ultrasonic system (SLUDGE FINDER 2 ) for measuring sludge level.
• 2 Channels
  
• Single Beam underwater acoustic sensor has automatic rotary wiper.
• Min range 0.3m, max - 50m, Accuracy +/- 0.03m.
• Four relays, independently assignable to any sensor.
• Outputs: 4-20mA per measurement point.
  
• Display: Backlit LCD dot matrix.

Based on piezoresistive technology, submersible hydrostatic level probes are designed with rigid & robust construction and cable with vent hose for submersible applications. Features:
• Accuracy: up to 0.1% full scale output, 0.25% (standard), 0.5%;
• Measuring ranges: 0-0.6,...,0-200 mH2O;
• Output: -70mV (standard) / 4-20mA or 0.5-5V for amplified output signal;

---

Submersible hydrostatic level transmitters are suitable for deep hydrostatic level measurement. Transmitters are designed with housing which provide power supply to level probe, signal configuration & remote transfer, option: field gisplay meter. Features:
• Accuracy: up to 0.3% full scale output;
• Measuring ranges: 0-0.6,...,0-200 mH2O;
• Output: 0.5-5V / 4-20mA.

Hydrostatic Level Transmitters for Flange Installation.
Transmitter is designed for relative pressure application in hydrostatic level measurement. Made from flange process connection, the model can be used for viscous and corrosive liquids or for liquids with grains. especially for oil chemical industry applications.
• Accuracy: up to 0.2% full scale output (0.5% - standard);
• Measuring ranges: 0-0.5,…0-250 mH2O;
• Output signal: 4-20mA;
• Construction: integrated construction, rigid & robust.

Level Sensors - Continuous indication of liquid level, float principles with magnetic transmission.

• Level sensors.
• By-pass level indicators.
• Float and Magnetic switches.
• Construction materials can be:
  Stainless-Steel, Titanium, Hastelloy, PP, PVC etc.

Pump and Float Control Switches
• Mercury and Mechanically activated.
• Control switches accurately monitor liquid levels in sewage and potable water applications.
• Control switch is UL Listed for Water and Sewage,
  CSA Certified and carries 3 year limited warranty.
• Mechanical Control Switches passed NSF standards by approved Water Quality laboratory.

MCL300N - Level Controller for 2 or 3 Electrodes.
• Use for Pumps operations or Alarms
• Internal Switch to select Filling or Emptying
• Electrodes:
  Common (vassal body, if it's metal) and ON + OFF Electrodes
• On front Panel 2 LED's and Sensitivity Adj.Pot

The Capacitance Continuous Level Measurement Probes provide a 4-20mA output (2wire) signal that is proportional to the level. Features:
• Zero and Span adjustment,
• optional armored cable for long distance applications,
• process connections include; Tri-Clamp as well as threaded or flanged,
• rods or cable can be coated when necessary.

---

The CL Line of Conductive Level Switches are designed to control the level of all conductive mediums with up to 8 different points of level detection. Models are available with
• fixed rigid rods,
• removable rigid rods, or with
• pendular electrodes attached to the housing with cables.